•12-Channel Parallel for simultaneous reception of 12 satellites.
•The DGPS Navigator composed of a
•DGPS receiver and a LCD display unit ensures very
accurate position fixing.

Features
Realized high-accuracy positioning with multi-GNSS compatible
It corresponds to five satellite systems of GPS, GLONASS, BeiDou, SBAS and QZSS*1, and high- accuracy positioning than single positioning by GPS is possible.

The Newly designed multi-GNSS compatible sensor allows simultaneous receiving of signals of up to 22 satellites, and achieves stable positioning.

Typically 4 seconds*3 for first position fixing without GPS almanac data. Positioning completes in 35 seconds*4 after power on even if the receiver has been left powered off for a long time.

It corresponds to NMEA 0183, IEC 61162-1 format which is standard of navigation equipment. NMEA 0183 is compatible with versions 1.5, 2.1, 2.3, and 4.0, and can be connected to radar, fish finder, plotter, etc.

Ver folleto

• Capable of SBAS (WAAS/EGNOS/MSAS) correction
• RAIM function is available
• 12-Channel Parallel for simultaneous reception of 12 satellites.
• IEC61162-1, NMEA0183 Output

Outline

Internal SBAS receiver

The GPS124 includes a SBAS (WAAS/EGNOS/MSAS) receiver.
By using SBAS you can achieve precise position.

The accuracy of position fixes is self-tested by the GPS124. (RAIM function)
This function assures higher reliability to the position fix than conventional method.

The GPS 124 is designed to simultaneously receive signals from 12 orbiting satellites, ensuring the most accurate positioning.

Since the output data is changeable between IEC61162-1 (NMEA0183 version 2.3), NMEA version 1.5 and 2.1, you can connect the GPS124 to various Marine Electronics Equipment such as Marine Radars, Fishfinders, Plotters, or others.

Ver folleto

• Internal Differential Beacon Receiver
• Capable of SBAS (WAAS/EGNOS/MSAS) correction
• RAIM function is available
• 12-Channel Parallel for simultaneous reception of 12 satellites
• IEC61162-1, NMEA0183 Output

Outline
Internal SBAS receiver
The DGPS224 includes SBAS(MSAS/WAAS/EGNOS) receiver.
By using SBAS you can achieve precise position.
Internal Differential Beacon Receiver
The DGPS224 includes a beacon receiver and GPS receiver.
By using DGPS you can achieve true DGPS accuracy.
RAIM function
The accuracy of position fixes in self-tested by the DGPS224.(RAIM function)
This function assures higher reliability to the position fix than conventional method.
12-Channel Parallel for Receiving 12 Satellites Simultaneously
The DGPS224 is designed to simultaneously receive signal from 12 orbiting satellites, ensuring the most accurate positioning. And also, typically 40 seconds for first position fixing without GPS almanac data.
IEC61162-1, NMEA0183 Output
Since the output data is changeable IEC61162-1, NMEA0183 version1.5, 2.1 and 2.3, you can connect the DGPS224 to various marine electronics equipment such as marine radars, fishfinders, plotters or others.

Ver folleto

Features

Both JLR-8400 and JLR-8600 are reliable and accurate GPS navigators which carry the same JRC DNA with uniform design and intuitive, trusted operation. Combined with our new multi-GNSS sensor you are ensured of accurate positioning without compromise.

JLR-8400

The compact JLR-8400 GPS navigator is compatible with Multi GNSS and will provide accurate position data even in Arctic area, without SBAS and beacon.

JLR-8600

The new JLR-8600 GPS navigator combined with our trusted 6.5-inch touch display will locate your position with high accuracy utilizing our newly designed antenna, providing you with the comfort of an intuitive operational approach.

Ver folleto

The new JLR-7500/JLR-7800 (D)GPS navigator will locate your position accurately and gives you a wide range of possibilities ? integrated with the latest technologies ? that will enhance your operational performance.

of the new display modes is the 3D highway, which allows you to intuitively view the location of the next waypoint. This 3D guidance is particularly valuable to follow a real-time chain of waypoints along a planned route.

The new (D)GPS navigator allows you to plan long distance routes highly effective. It is possible to set Rhumb lines (RL) for short legs, while Great Circle (GC) can be set for the long distance legs ? all possible within the same route. Simply make your selection for each leg to reach your destination effortlessly.

All information is displayed on a highly visible 5.7-inch LCD display, featuring added sharpness and contrast compared to the previous version. Many display modes are readily available and selectable from the menu, such as navigation, CDI, highway, track plotting and service and information screens. The display has four dim modes, allowing adjusting at your own convenience.

Ver folleto

The JLR-7600/7900 (D)GPS navigator will locate your position fast and with high accuracy, keeping the unit compact and easy to install.

The unit incorporates many displays modes readily available on a highly visible 4.5-inch LCD display.
Besides the display being fully dimmable and having backlit keys, it features dual LED backlight (white and orange), making it easy to operate in various light settings on the bridge.

The new (D)GPS allows you to set the distance calculation method directly from the menu. It is possible to set either Rhumb lines (RL) for short legs or Great Circle (GC) for the long distance legs. Depending on your route, simply make your selection to reach your destination effortlessly.

Up to 1,000 waypoints can be stored in the internal memory. All waypoints can be named and renamed up to eight characters. You can make 20 routes with 50 waypoints per route, which can be entered randomly, and there's room for 2,000 points for ships' track and up to 1,000 for events and marks.

With JRC's new design approach, a flush mount kit is not required and screws are nicely concealed behind the front cover.
The display is very compact and can be mounted virtually anywhere, allowing for flexible installation approach.

Ver folleto